Viessmann boiler pressure reduction , Viessmann boiler depressurization problem is one of the most common boiler malfunctions. Your Viessmann combi is one of the most durable air conditioners.

The pressure drop may have been caused by the heat exchanger. To give an example in the interior of the combi boiler, there is a thin wall similar to a car radiator. This wall between the two rooms wears out over time and the chalky water erodes the parts. The hot water that needs to be returned from the cold water connection to the boiler gets clogged due to limescale and the boiler pressure rises.

In order to solve the problem correctly, you need to call the authorized service for your boiler.

Viessmann Boiler Pressure Reduction

Combi boilers are air-conditioning devices that are indispensable for our homes and workplaces for many years. Your combi boiler, whose annual maintenance is not done, wears out over time. deteriorated parts cause the water pressure of your boiler to rise.

To eliminate this problem, the part must be replaced.

The expansion tank is a section inside the boiler and is where the water of the boiler is heated. Inside this tank there is a sensitive part to adjust the expansion of the boiling water. Each part has a task and over time, the worn part loses its function.

The boiler operates and the water leaking through the system increases the bar pressure. The honeycomb pipe is clogged, the boiler cannot send its own heated water to the boiler at the desired speed and time, the boiling water is in the boiler and the water pressure of the boiling water increases.

How Viessmann Boiler Reduces Pressure

What should be the pressure in my viessmann boiler? If your Viessmann boiler pressure is too low, you may notice that there is no heating or hot water when you need your boiler. Bar pressure If it is too high, your boiler may shut down completely or cause serious damage to its components if no precautions are taken.

In the worst case, your boiler will stop working and you may have to call an authorized service.

Bar pressure rise prevents hot water from going to the honeycombs. While this condition is obvious signs of a problem, there are other warning signs that something is wrong.

Viessman combi water pressure is in the range of 1-1.5 bar. Therefore, you can check whether the gauge on the control panel has a pressure problem. It is worth remembering that when using the boiler you will see an increase in pressure

How To Reduce Viessmann Combi Bar Pressure

Is it dangerous to have low boiler pressure? The good news is that the low pressure problem in the Viessmann boiler is not dangerous (it will prevent your boiler from working). But it is unlikely to cause any damage to the operation of your boiler.

However, this will likely increase fuel consumption and cause negative effects on your budget!

Low pressure will significantly affect the efficiency of the boiler, lowering it well below what it should be and also increasing your electricity bills.

If you want to know what is causing the problem, the most common reason is a system leak. Even the smallest leak in the pipeline can cause a drop in pressure. The boiler pressure must be at the right level for your boiler to work fully efficiently.

Therefore, it is possible to lower or raise the water pressure from the bottom of your boiler.

even though the newly introduced boiler technology can electronically re-adjust the high water pressure. It is useful to check the water pressure setting on the front panel of your boiler.